Home > Engine > Exhaust
Sort By:
Page of 1
Stainless Steel, weld in 02 sensor bung

Stainless steel weld in type 02 sensor bung. Made from 304 stainless steel, 1" OD, 18mm thread 1/2" long.

Our Price: 5.95
Volvo OEM Exhaust Clamp, Clamshell "Top"

Volvo OEM Exhaust clamshell top piece for connecting your downpipe/ball coupling to your cat back.

Our Price: 9.95
Volvo OEM Exhaust Clamp, Clamshell "Bottom"

Volvo OEM Exhaust clamshell bottom piece for connecting your downpipe/ball coupling to your cat back.

Our Price: 9.95
Clampco 2.5" Stainless Steel V-Band Clamp

When it comes to quality v-band flange clamps Clampco is it. This is the highest quality v-band clamp on the market today. Fits 2.5" I.D. v-band flange.

Our Price: 10.95
Volvo 16mm Exhaust Air Pump Fitting Bung

Volvo 16mm air pump fitting bung for 850, 70 series cars and newer outfitted with an air pump.

Our Price: 12.95
Blanking Plate for Mitsubishi TD04 family turbos

This blanking plate fits all TD04 family of turbos. For use when replacing the CBV valve with a blow-off valve.

Our Price: 14.50
Clampco 3" Stainless Steel V-Band Clamp

When it comes to quality v-band flange clamps Clampco is it. This is the highest quality v-band clamp on the market today. Fits 3" I.D. v-band

Our Price: 14.95
3" Weld On Stainless Steel V-Band Flange

High quality CNC machined 3" I.D. weld on v-band flange. This is a close tolerance fit v-band flange.

Our Price: 22.50
3" Stainless Steel Tubing, .065 Wall, 24" Long

3" Stainless Steel Tubing, .065 Wall, 24" Long

Our Price: 28.00
3" Stainless Steel Flex Coupling

This high quality flex coupling is 3" in and 3" out and 6" in length. Interior bellows and exterior stainless braid offers a long lasting solution to engine to exhaust movement.

Our Price: 35.95
3" Stainless Steel Mandrel bent 45° Bend .065 Wall

High quality 3" mandrel bent 45° bends with a tight 3" radius, 2X 6" legs.

Our Price: 35.95
3" Stainless Steel 90 Degree Elbow, 3" tight radius

High quality 3" OD X .065 wall 90 degree elbow on a tight 3" radius.

Our Price: 35.95
3" Stainless Steel 120 Degree Bend

High quality Stainless Steel mandrel bent 120 degree radius bend with 6" legs. Bent on a tight 3" radius.

Our Price: 37.95
P2 Exhaust Tail Flange

If your constructing a down pipe for your P2 S/VR You will need one of
     these to mate up to the stock exhaust.  Made from 3/8" Stainless Steel
     for durability and corrosion resistance.

Our Price: 39.50
3" to 2.5" Ball Coupling

Volvo 850/70 series cars use a ball coupling to connect the down pipe to the cat back section of their exhaust system. This coupling allows you to connect your 3" down pipe to the existing cat back easily. 3" inlet, ball coupling outlet.

Our Price: 39.50
TD04 Mild Steel Straight Flange

Mild steel flange that fits Mitsubishi TD04-HL turbocharger with straight flange housing. For use with modifying or building your own exhaust system or down pipe. Comes with sealing groove machined in flange. Bolt holes are 10mm with a 61mm center hole.

Our Price: 44.95
TD04 Mild Steel Angle Flange

Mild steel flange that fits Mitsubishi TD04-HL turbocharger with an angle flange housing. For use with modifying or building your own exhaust system or down pipe. Comes with sealing groove machined in flange. Bolt holes are 10mm with a 72mm center hole.

Our Price: 44.95
TD04 Stainless Steel Straight Flange

Stainless steel flange that fits Mitsubishi TD04-HL turbocharger with straight flange housing. For use with modifying or building your own exhaust system or down pipe. Comes with sealing groove machined in flange. Bolt holes are 10mm with a 61mm center hole.

Our Price: 54.95
T6 Exhaust Flanges, Turbo Side

Want to build a down pipe for your T6, but don't know where to get the flanges. Here you go. Currently available in mild steel. Soon to be available in Stainless Steel. These laser cut 3/8" flanges have 3 3/4" hole for use with a larger pipe going rearward.

Our Price: 55.00
T6 Exhaust Tail Flange, Mild Steel

Want to build a cat back for your T6, but don't know where to get the flanges.  Here you go.  These laser cut 3/8" tail flanges have 2 3/4" holes for use with a larger pipe going rearward.  Also available in Stainless Steel.

Our Price: 55.00
3" Stainless Steel V-Band Kit

Stainless steel v-band clamp kit includes two 3" close tolearnce weld on v-bands and 1 3" Clampco v-band clamp.

Our Price: 59.50
TD04 Stainless Steel Angle Flange

Stainless steel flange that fits Mitsubishi TD04-HL turbocharger with an angle flange housing. For use with modifying or building your own exhaust system or down pipe. Comes with sealing groove machined in flange. Bolt holes are 10mm with a 72mm center hole.

Our Price: 59.95
T6 Exhaust Tail Flange, Stainless Steel

Want to build a cat back for your T6, but don't know where to get the flanges. Here you go. These laser cut 3/8" tail flanges have 2 3/4" holes for use with a larger pipe going rearward.

Our Price: 75.00
Magnaflow 3" inlet, 3" outlet catalytic converter

Magnaflow 448009 3" inlet, 3" outlet ceramic core catalytic converter.
  • Universal California OBDII Compliant
  • 1995-2003 Cadillac Deville, 1996-2002 Eldorado, 1996-2003 Seville Catalytic Converter - 50 State Legal
  • CARB Compliant
  • Stainless Steel Construction
This converter will work better than your OEM for your 3" Volvo exhaust, but is not California compliant for this application. It is only California compliant for the above mentioned vehicles.

Our Price: 239.50
3" Stainless Steel Down Pipe, 850/70 Series w/Straight Flange Outlet, FWD

Straight flange outlet down pipe fits '96-'99 FWD series Volvo 850 and 70 series cars outfitted with straight flange turbo. 3" mandrel bent tubing, TIG welded construction, Magnaflow 448009 3" ceramic catalytic converter included. For off road use only, not California compliant.

Our Price: 899.50
3" Stainless Steel Down Pipe, 850/70 Series w/Angle Flange Outlet, FWD

Angle flange outlet down pipe fits '96-'99 FWD series Volvo 850 and 70 series cars outfitted with angle flange turbo. 3" mandrel bent tubing, TIG welded construction, Magnaflow 448009 3" ceramic catalytic converter included, but not shown. For off road use only, not California compliant.

Our Price: 899.50
3" Stainless Steel Down Pipe, 850/70 Series w/Straight Flange Outlet, AWD

Straight flange outlet down pipe fits '98-99 series Volvo 70 series cars with straight flange turbo. 3" mandrel bent tubing, TIG welded construction, Magnaflow 448009 catalytic converter included. This converter is better than your OEM converter, but is not California CARB compliant. For off road use only. These are special order with 3-4 week production time.

Our Price: 999.50
3" Stainless Steel Down Pipe, 850/70 Series w/Angle Flange Outlet turbo, AWD

Angle flange outlet down pipe fits 1999 series Volvo 70 series cars with angle flange turbo. 3" mandrel bent tubing, TIG welded construction, Magnaflow 448009 catalytic converter included. This converter is better than your OEM converter, but is not California CARB compliant. For off road use only. These are special order with 3-4 week production time.

You must specify what year and model when ordering. "R" and non "R" cars are different and 1999 "R" and 2000 "R" are different.

Our Price: 999.50